Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

  Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

DC / Direct Current Motors

DC motors requires a basic understanding of the design and operating characteristics of the various types available: the series motor, the shunt motor, and the compound motor. Each type has unique operating characteristics and applications.

DC motors requires a basic understanding of the design and operating characteristics of the various types available: the series motor, the shunt motor, and the compound motor. Each type has unique operating characteristics and applications.

DESIGN 
Our Designs, parts & Dimensions are as per I.S.I Standards. Latest Innovations are  incorporated. Changes are made with times and also as per Customer demands.
FRAME & ENCLOSURE
Our Steel made Frames ensure greater strength & standard type production. Ventilation is provided by strong fan. In case of excess heat due to low speeds, Blower Mounting arrangement are provided for necessary Cooling.
WINDINGS
In the standard version, all motors have separate excitation, the field going shunt wound. Compound or series winding can be supplied on request.
The Shunt Coils are wound in such a way with  Main Pole that, solid inter-pole & main-pole base would withstand any type of vibration. Coils made of copper conductors are insulated & then vacuum impregnated with high grade varnish ensuring resistance against acids, oil & moisture.
In higher versions Thermostatic receivers are placed between the coils to protect the windings against over heating (130 degrees of celsius). These receivers have to be connected serially to the DC driver's stop circuit in order to resist 3A. 250V.
BEARINGS
All bearings and their internal clearances have been especially selected based on load carrying ability, thermal stresses and speed range consistent with ample bearing life.
COMMUTATORS& COMMUTATION
Manufactured Cylindrically, with hard-drawn copper and V-Groove segments of high conductivity, insulated by a mica sheet in between. Complete commutator is baked for high temperature testing.
Almost sparkless commutation with converter connection even in the overloaded range due to optimized compole field, magnetic decoupling of the main and compole field circuit and rotor windings with very good commutation characteristics.
BRUSH BOX & BRUSHES
All motors utilize top-cushioned brushes for low-vibration operation. Brush holders are extruded metal. The constant pressured springs do not need adjustment.
Brush Gear is made of strong, special design- but with simple construction- making it possible for shafts to rotate easily at low speeds with noise-free service. Provision for easy access to replace and adjust the brushes is provided. Brushes are of standard grades, ensuring sparkless commutation.
ARMATURE

Armatures are built of high quality Standard Steel Laminations, Securely insulated from each other and clamped together under high pressure ensuring low heating losses. Coils and wire-winding is strictly as per insulation class 'B'. Armature are Dynamically Balanced to precise grade using computerised balancing machine to ensure low vibration operations. Resin Binding means full protection of Armature in all respects.

TESTS & TESTING
Each motor is given routine tests to determine that it is free from electrical or mechanical defects and to provide assurance that it meets design specifications.
All products are thoroughly  & vigorously tested on special Heavy Duty Test Bench and Dynamometer. Special rated Motors & Generators are tested on Full Load for more than Five Hours (HEAT RUN TEST) for temperature rises and the same are not permitted  to exceed values prescribed as per I.S. 4722. All windings are put to insulation test with lowest rate of 1.5 to 2 KV.
 
DC Drives
Chopper Controllers
Control Panels
UPS Systems
Semi-Traction Motors
Diesel Generators
 
Equipments for Educational Institutes, Engineering Colleges
Educational Type DC Motors
Cut Section AC / DC Motors
Slip Ring Induction Motors
Alternators & DC Generators
Repulsion Motors
DC Starters 
 
 
 
 
Home - About Us - Products - Upcomings - Contact Us - Feedback  Designed & Hosted by : MID | Promoted by : GID